1110
Color: Clear
Plastisol Inks
Curable Reducer 1110 lowers the viscosity of plastisol inks without affecting the fusing characteristics. This product is non-phthalate.
When adding reducers to any plastisol ink, use a minimal amount of reducer to help maintain opacity. The recommended proportion of 1110 reducer to ink is 1% to 10% by weight.
Curable Reducer 1110 lowers the viscosity of plastisol inks without affecting the fusing characteristics. This product is non-phthalate.
When adding reducers to any plastisol ink, use a minimal amount of reducer to help maintain opacity. The recommended proportion of 1110 reducer to ink is 1% to 10% by weight.
Note that the 1110 reducer should not be used in low bleed inks as it can lower the bleed resistance of those type inks.
All products listed below have only been tested with International Coating’s inks. If these products are used with another manufacture’s products, proper testing must be done to help insure the performance and durability of the mixed product. The use of a curable reducer is highly recommended for general use when adjusting the viscosity of plastisol inks.
Products that are designated as curable reducers will fuse or cure by themselves with the application of proper heat and time. The use of a curable reducer is highly recommended for general use when adjusting the viscosity of plastisol inks because these curable reducers and modifiers can fuse or cure by themselves with the proper application of heat and time. This means that if too much of the curable reducer or curable modifier is added, the mixed ink will still fuse or cure.
The more curable reducer or curable modifier added, the more the opacity of the mixed product will be lowered.
Recommendations and statements made are based on International Coatings’ research and experience. Since International Coatings does not have any control over the conditions of use or storage of the product sold, International Coatings cannot guarantee the results obtained through use of its products. All products are sold and samples given without any representation of warranty, expressed or implied, of fitness for any particular purpose or otherwise, and upon condition that the buyer shall determine the suitability of the product for its own purpose. This applies also where rights of third parties are involved. It does not release the user from the obligation to test the suitability of the product for the intended purpose and application.
Match the reducer being used with the characteristics of of the ink being modified. Ex: Lo-Bleed Reducer with Low Bleed Inks.
N/A (Not applicable on this product sheet)
N/A (Not applicab
110–305 t/in (43–120 t/cm) monofilament.
Any direct or indirect emulsion or capillary film in the 35 to 70 micron range
65–70 Durometer, sharp edge.
N/A
Quart
1 Gallon
5 Gallon
30 Gallon
50 Gallon
65°F to 90°F (18°C to 32°C). Avoid storage in direct sunlight. Keep containers well sealed.
Any Eco-friendly plastisol screen wash
Plastisol Inks
SKU: 3816
Plastisol Inks
SKU: 3818
Plastisol Inks
SKU: 720
Explore our diverse range of products designed to meet your unique needs and applications.
Learn more