UltraMix® Fluorescent Magenta 7569

Features

UltraMix® 7500 Color Concentrate (CC) Series Pantone® Color Matching System consists of 19 non-phthalate, semi-curable pigment concentrates that can be used to strengthen, shade, tint, or enhance International Coatings' inks.

Create special or standard colors by mixing the Color Concentrates 7500 Series with appropriate International Coatings' bases while using International Coatings’ UltraMix®, Pantone® color matching online software.

Modifying Color Concentrates

The Color Concentrates 7500 Series Pantone® Color Matching System should not be modified with any product. Any adjustments, if needed, should be made after the color concentrates are mixed into the other inks or bases.

Mix Ratios

To mix standard opacity primary colors, the mix ratio is: 2-parts 7000 Medium Mixing Base to 1-parts Color Concentrate.

To make HD (high density) colors using International Coatings 142 HD Base, a good starting point would be a mix ratio of 5-parts 142 HD Base to 1-part Color Concentrate 7500 Series. Test first before doing a production run.

A good starting point for addition of Color Concentrates to a finished ink is 15% by weight. Note that adding too much of the color concentrates to another ink can possibly lead to crocking, poor bleed resistance or change the curing/fusing parameters. Test first before doing a production run.

Important Information

Color Concentrates 7500 Series Pantone® Color Matching System are not stand alone inks and will not cure/fuse properly and become wash fast unless mixed into other RFU inks or appropriate bases. The color concentrates must be thoroughly mixed into the desired ink or base before using.

Colors produced using the Color Concentrate 7500 Series Pantone® Color Matching System will vary in opacity. Colors will reproduce best on white or light colored fabrics. Colors may appear metameric (not match well) when viewed under different types of lighting.

Test dryer temperatures and wash test printed product before and during a production run.

Legal Disclaimer

Recommendations and statements made are based on International Coatings’ research and experience. Since International Coatings does not have any control over the conditions of use or storage of the product sold, International Coatings cannot guarantee the results obtained through use of its products. All products are sold and samples given without any representation of warranty, expressed or implied, of fitness for any particular purpose or otherwise, and upon condition that the buyer shall determine the suitability of the product for its own purpose. This applies also where rights of third parties are involved. It does not release the user from the obligation to test the suitability of the product for the intended purpose and application.